Reinforcement Steel Wire Mesh

Welded Mesh Fabric Reinforcement is manufactured using cold-rolled deformed wire, electrically resistance welded at the intersections of the longitudinal and transverse wires at the required mesh spacing with minimal loss of strength and cross-sectional area.

Welded Mesh Fabric is generally used in surface beds (concrete floor slabs on fill) and road pavements, mesh can also be used in suspended floor slabs, concrete retaining walls, box culverts and drains, precast stadium seating, tilt-up wall panels to name a few.

Product Features:

•  Using welded mesh drastically speeds up the construction process
•  Welded mesh is available in wide range of wire diameters each suited for a particular reinforcing design application
•  Depending on job requirements welded mesh can be designed either in flat sheets, rolls or bent to suit
•  The deformed wire used in the production of welded mesh improves concrete adhesion. The wire has a minimum proof stress of 485MPa and a tensile strength of 510MPa as per BS4482 Standard Specification requirements
•  Welded mesh can be used at higher stresses than that of high tensile rebar, resulting in an 8% overall material saving
•  Due to its rigid nature, concrete cover can be controlled more accurately on site
•  Welded mesh is manufactured in strict accordance to SANS1024 Standard Specifications as well as to international standard specifications on request
•  Where there is a significant amount of repetition, conventional bar reinforcement can be substituted with pre-manufactured designed mesh resulting in easier controls, speed of installation, reducing offcuts and wastage.
  

  Fabric	Mesh Size Nominal Pitch of Wires		Wire Sizes		Cross Sectional Area/m Width		Nominal Mass/m2
  	Ref No.	Main (mm)	Cross (mm)	Main (mm)	Cross (mm)	Main (mm)	Cross (mm)	kg	Supplied in
  Square Mesh Fabric	A12	200	200	12	12	566	566	8.88	Sheets only 6m x 2.4m
  	A11	200	200	11	11	475	475	7.46
  	A10	200	200	10	10	393	393	6.17
  	A9	200	200	9	9	318	318	5.00
  	A8	200	200	8	8	251	251	3.95
  	A7	200	200	7.0	7.0	193	193	3.02
  	A6	200	200	6.0	6.0	142	142	2.22
  	A5	200	200	5.0	5.0	98	98	1.54	Sheets or rolls
  	A4	200	200	4.0	4.0	63	63	1.00